[ Follow Ups ] [ Post Followup ] [ NMS WWWBoard Version 1.0 ] [ FAQ ]
Posted by jas on 17:05:02 06/18/03
In Reply to: Rigging Photos posted by Ted
: All I have left is a few extra pad eyes and installing my new Fish Finder and I am all done.I made my own Bowline. The hollow poly rope and snaps were very easy to work with. So easy that I bought some 1/4 inch diameter hollow poly rope and made extra lines for the padeyes on both sides of the cockpit. I can use those lines as leashes or justr a quick place to attach my bait bucket or hand held GPS. They will alos come inhandy during rough weather. I can just clip one end to my fishing poles and then that way. I will not have the front hatch open if I get hit by sudden bad weather.I put on the paddle clips and in the next picture I took a aluminum yardstick ($2.00), cut it at 28 1/4
Tom came up with that idea. Works well! Just be sure there aren't any sharp edges like Ted said. I used marine silicone to soften the corners out and to prevent fishing line from entering between the bar and the yak.
jas
[ Follow Ups ] [ Post Followup ] [ NMS WWWBoard Version 1.0 ] [ FAQ ]